Mississippi Wage Garnishment Calculator
How much a Mississippi paycheck can lose to a garnishment, support withholding, tax levy, student loan or Chapter 13 plan. Miss. Code 85-3-4, 93-11-103, 15 U.S.C. 1671-1677. Estimates only.
1. Mode, county and pay date
2. Gross pay and legally required withholding
3. Order type and amounts
Support order details
MDHS income withholding applies the CCPA tiers 50 / 55 / 60 / 65% of disposable earnings; lump-sum severance arrears are capped separately under Miss. Code 93-11-103 (VERIFY). Support is not blocked by the 85-3-4 resident exemption.IRS levy – Publication 1494
Chapter 13 plan
Stack mode – ordered per period (0 = none)
4. Balance and payoff
Paycheck and protected income (no county, 2026)
Caps and binding limit
Priority waterfall
Payoff timeline
Procedure and defenses
Venue. Writ and 30-day window. Claim of exemptions. Employment protection. Other Mississippi exemptions. Procedure note.How it works
- Disposable = gross minus legally required withholding; voluntary shown separately.
- Weekly conversion = 52 / periods (1, 2, 2.1667, 4.3333); CCPA tests run weekly.
- Resident debtors keep all wages for 30 days after the writ is served (Miss. Code 85-3-4); the checkbox models that window.
- After the window, consumer cap = lesser of 25% of disposable and the amount above $217.50 weekly, reduced by other non-support garnishments.
- Support = lesser of ordered and the CCPA tier 50 / 55 / 60 / 65% of disposable; the state exemption does not block it.
- Student loan = lesser of 15% disposable and above the federal 30x floor.
- IRS = disposable above Pub 1494 exempt; DOR = modeled at 25% of disposable; neither uses the state exemption or cap.
- Stack applies precedence in order and the 25% aggregate on non-support, non-tax orders.
- Payoff amortizes at the entered rate and flags non-amortizing or zero-withholding cases.
Sources
- Miss. Code 85-3-4 (resident wage exemption from seizure; 30-day window after service of the writ): law.justia.com
- Miss. Code 85-3-1 ($10,000 personal property exemption, residents only): codes.findlaw.com and mslegalservices.org
- MDHS child support guidelines and income withholding manual (CCPA tiers 50-65%): mdhs.ms.gov
- Miss. Code 93-11-103 (lump-sum severance withholding cap): codes.findlaw.com
- 15 U.S.C. 1671-1677 and DOL Fact Sheet 30: dol.gov
- Mississippi Department of Revenue levy and garnishment guidance: dor.ms.gov
- Miss. Code 75-17-1 and 75-17-7 (8% legal rate; contract rate governs contract judgments): law.justia.com
- IRS Pub 1494 and Form 668-W: irs.gov
- 20 U.S.C. 1095a, 34 CFR 34.19: studentaid.gov
Test cases
What Is a Mississippi Wage Garnishment Calculator?
A Mississippi wage garnishment calculator estimates paycheck withholding from disposable earnings, pay frequency, order type, existing garnishments, and other order-specific inputs. For an ordinary judgment, this tool compares 25% of disposable earnings with the amount above its 30-times-federal-minimum-wage floor and can reduce withholding to zero during its modeled resident 30-day exemption window.
The calculator supports weekly, biweekly, semimonthly, and monthly pay. It displays withholding for the current pay period, a weekly equivalent, an annual equivalent, disposable earnings, protected income, take-home pay, and the percentage of disposable earnings withheld.
Its stacking mode processes support, IRS, DOR, federal student loan, and consumer orders in sequence. Payoff mode uses the calculated withholding as a recurring payment against an entered balance and interest rate.
How the Mississippi Wage Garnishment Calculation Works
The calculator first determines disposable earnings. It adds federal income tax, Mississippi income tax, Social Security and Medicare, mandatory retirement, and other required withholding. If those entries exceed gross pay, required withholding is capped at gross pay. Voluntary deductions are not included in disposable earnings.
Here, G is gross pay for the period, R is total legally required withholding, and D is disposable earnings.
Ordinary consumer and private student loan judgments
For an ordinary consumer or private student loan judgment, the calculator uses an encoded federal minimum wage of $7.25 and a multiplier of 30. That produces a $217.50 weekly protected floor. The weekly test is converted to the selected pay frequency.
p is pay periods per year, s is weeks represented by one pay period, and F is the protected amount for that pay period. The code uses 52 periods for weekly pay, 26 for biweekly, 24 for semimonthly, and 12 for monthly pay.
The amount of disposable earnings above the floor is:
After the modeled resident exemption window has ended, the ordinary garnishment cap is the smallest of 25% of disposable earnings, the amount above the protected floor, and the remaining 25% room after other non-support garnishments.
O is the amount entered for other non-support garnishments. If “Amount demanded per period” is greater than zero and below this calculated cap, the calculator uses the smaller demanded amount.
The resident and service-date checkboxes add another branch. If both “Judgment debtor resides in Mississippi” and “Writ of garnishment served within the last 30 days” are checked, the calculator sets ordinary consumer and private student loan withholding to zero.
Here, A is the amount demanded. A zero demand means the calculator uses the full calculated cap.
Worked ordinary-garnishment example
Assume weekly gross pay of $1,000, required withholding of $200, no voluntary deductions, and no other garnishments. Also assume the calculator's resident 30-day window is not active. Disposable earnings are $800.
Twenty-five percent of disposable earnings is $200. The amount above the $217.50 weekly floor is $582.50.
The calculator therefore shows $200.00 withheld for the week when no smaller positive demand applies. With no voluntary deductions, displayed take-home pay is $600.00 and the withholding equals 25.00% of disposable earnings.
Support withholding
Child and spousal support use a separate percentage calculation. The code starts at 60% of disposable earnings if the second-family box is not checked and 50% if it is checked. Selecting the box for arrears 12 weeks or older adds five percentage points.
A lower positive amount demanded reduces the result. The calculator does not apply its resident 30-day exemption to support withholding.
Federal student loan, tax, and Chapter 13 calculations
Federal student loan AWG uses the smaller of 15% of disposable earnings and disposable earnings above the same $217.50-per-week federal floor.
The AWG calculation itself uses the floor correctly. However, the explanatory driver-note code references a weekly-floor property that is not created in the base calculation. Because the currency formatter converts that missing value to zero, that specific explanatory note can display a $0.00 weekly floor even though the actual AWG cap uses the calculated floor-room value.
An IRS levy uses disposable earnings above an estimated exempt amount. If the user enters a positive override exempt amount, the calculator uses that value instead. Otherwise, it uses its built-in standard deduction for the selected year and filing status, adds $5,300 per dependent and $1,600 per age-65-or-blind box, then divides by pay periods per year.
S is the calculator's annual standard-deduction value, d is the dependent count, and b is the age-65-or-blind count. The code floors the two count inputs to whole numbers before using them.
The Mississippi DOR branch is modeled at 25% of disposable earnings. Chapter 13 converts the entered monthly plan payment into a per-pay-period amount and caps it at disposable earnings.
The calculator's 30-day resident window does not reduce its support, IRS, DOR, federal student loan, or Chapter 13 branches.
Payoff timeline calculation
Payoff mode uses the calculated withholding as a recurring payment. The APR field defaults to 8% and accepts values from 0% through 40%. For a positive APR, the code converts the annual rate to a per-period rate and applies an amortization formula.
B is the balance, P is withholding per period, and n is the number of periods. If the payment does not exceed one period of interest, the calculator reports that the balance never amortizes. With 0% interest, it uses the ceiling of balance divided by payment.
For example, the calculator's own test values of a $4,000 balance, 8% APR, and $200 weekly payment produce 21 periods, $4,200 total paid, and $200 of displayed interest. For positive APR calculations, total paid is simply the rounded-up number of periods multiplied by the full recurring payment, so the last payment is not reduced to an exact remaining balance.
How to Use the Mississippi Wage Garnishment Calculator
- Select Single order, Stacking, or Payoff timeline mode.
- Choose the wage year, Mississippi county, and pay frequency.
- Set the Mississippi resident and within-30-days checkboxes to match the ordinary-garnishment scenario you want to model.
- Enter gross pay and any federal tax, Mississippi tax, Social Security and Medicare, mandatory retirement, and other required withholding.
- Enter voluntary deductions separately if you want them included in displayed take-home pay.
- Select the order type and enter the amount demanded per period when applicable. Zero uses the calculated maximum in single-order mode.
- Complete any support, IRS, Chapter 13, stacking, balance, or APR fields that apply.
- Check the required acknowledgment and select Calculate.
The primary result is “Withheld per pay period.” The calculator also shows weekly and annual withholding, required deductions, disposable earnings, the protected floor, cap amounts, remaining room, take-home pay, and the share of disposable earnings withheld. Currency values are displayed with two decimal places, and the withholding percentage is displayed to two decimal places.
Important Inputs, Modes, and Calculation Limits
Pay frequency changes the floor for each paycheck. Weekly pay represents one week, biweekly pay two weeks, semimonthly pay about 2.1667 weeks, and monthly pay about 4.3333 weeks. The ordinary federal floor remains based on the calculator's encoded $7.25 rate for every available pay year.
The year selector offers 2024, 2025, and 2026. For the ordinary garnishment formula, those years do not change the $217.50 weekly floor. They do change the built-in standard-deduction amount used by the IRS levy estimate. County is required but affects the venue and procedure text rather than the numerical withholding formula.
Most money fields allow values from $0 through $10,000,000. The debt-balance field allows up to $100,000,000. APR allows 0% through 40%. IRS dependents allow 0 through 20, while the age-65-or-blind input allows 0 through 2. Gross pay must be greater than zero before calculation can proceed.
The “Support already withheld” field is informational in the single-order calculation and does not reduce the ordinary consumer result. “Other non-support garnishments” does reduce the ordinary 25% room. Voluntary deductions affect displayed take-home pay but do not reduce disposable earnings.
One display detail deserves attention when a smaller positive amount is demanded for an ordinary judgment. The withholding amount correctly falls to that smaller demand, but the binding-factor logic has no separate “amount demanded” branch. Unless another condition matches exactly, the text can label “25% of disposable” as the binding factor even when the lower demanded amount actually determined withholding.
How stacking mode works
Stack mode processes five dedicated amounts in this order: support, IRS levy, DOR levy, federal student loan AWG, and consumer judgment. Zero in one of these five boxes means that order contributes nothing.
Support is capped by the support percentage and remaining disposable earnings. The IRS step uses remaining earnings above the estimated exemption. DOR is limited to 25% of original disposable earnings and whatever remains. The consumer step uses the ordinary cap and the remaining non-support room.
The AWG step uses its 15% and federal-floor cap but is not separately limited to the disposable earnings remaining after support, IRS, and DOR have already been deducted. Extreme combinations can therefore push the stack's internal remaining amount below zero. Displayed take-home pay is still floored at $0.00.
The resident 30-day window reaches the consumer step through the ordinary consumer-cap function, so it can reduce stacked consumer withholding to zero. It does not reduce the earlier support, IRS, DOR, or AWG steps.
Stack mode also displays the payoff panel using total stacked withholding as the recurring payment. A positive balance is not separately required by stack mode, so leaving the balance at zero produces the payoff panel's “Enter a balance” state.
This calculator addresses legal and financial withholding, so its output should be treated as an estimate. The calculator itself flags the scope of the resident exemption, support rules, DOR percentage, court procedures, exemption deadlines, and interest assumptions for verification. Actual orders and legal circumstances can produce different results.
Frequently Asked Questions
How does the calculator estimate an ordinary Mississippi wage garnishment?
After any modeled 30-day resident exemption window, it compares 25% of disposable earnings with disposable earnings above a $217.50 weekly floor. It also reduces the available 25% room by other non-support garnishments. The smallest applicable amount becomes the cap before any lower positive amount demanded is applied.
What happens during the calculator's 30-day resident exemption window?
If both the Mississippi-resident box and the within-30-days box are checked, ordinary consumer and private student loan judgment withholding becomes $0.00. The code does not apply that window to support, federal student loan AWG, IRS levies, DOR levies, or Chapter 13 payments.
What counts as disposable earnings in this calculator?
Disposable earnings equal gross pay minus the entered federal income tax, Mississippi income tax, Social Security and Medicare, mandatory retirement, and other required withholding. If those required deductions exceed gross pay, the calculator caps them at gross pay. Voluntary deductions are handled separately.
What does zero mean in the amount demanded field?
In single-order mode, zero tells the calculator to use the maximum produced by that order type's formula. A positive demand below the applicable cap reduces the result. In stacking mode, the five dedicated order fields work differently: zero means that particular order contributes no withholding.
How does support withholding work in the calculator?
The support branch uses 60% of disposable earnings when the second-family box is not checked and 50% when it is. Checking the arrears-12-weeks box adds five percentage points. The resulting calculator tiers are therefore 50%, 55%, 60%, and 65%, subject to a lower positive amount demanded.
Why can the payoff calculator show no payoff period?
It shows no positive payoff period if the balance is zero, withholding is zero, or a positive-interest payment does not cover one period of accrued interest. In the last case, the code reports that the balance never amortizes because the recurring payment cannot reduce principal.
Does selecting a Mississippi county change the garnishment amount?
No. The county field is required, but the code uses it for venue and procedure text rather than a county-specific mathematical rate. The dollar calculation depends on paycheck values, pay frequency, exemption-window selections, order type, and other order-specific inputs.