Resistor Thermal Noise Calculator
Thermal Noise Evaluation
V_n = √(4 · k_B · T · R · Δf). Real circuits may also exhibit excess 1/f (flicker) noise depending on resistor chemistry (carbon composition vs. metal/wirewound), shunt capacitance, or amplifier input noise.What Is a Resistor Thermal Noise Calculator?
A resistor thermal noise calculator finds the random RMS voltage a resistor produces because of heat. It uses the Johnson–Nyquist formula, Vn = √(4kTRΔf), with your resistance, temperature, and noise bandwidth. This tool also shows noise density, RMS noise current, and available noise power for the same inputs.
Thermal noise is also called Johnson noise or Johnson–Nyquist noise. Every resistor above absolute zero produces it, even with no current flowing. Electrons inside the resistor jiggle randomly with heat. That motion creates a tiny, constantly changing voltage across the resistor’s ends.
The result is an estimate for an ideal resistor. Real parts can add other noise types that this calculator does not model.
How the Johnson–Nyquist Noise Formula Works
The calculator converts every input to base units first: ohms, kelvin, and hertz. It then multiplies your bandwidth by the shape factor you picked. That gives the effective noise bandwidth.
Here, S is 1 for the brick-wall option. For the first-order RC low-pass option, S is π/2, which is about 1.571. The main result comes from this formula:
- Vn: RMS thermal noise voltage, in volts.
- kB: Boltzmann constant, 1.380649 × 10−23 J/K.
- T: absolute temperature, in kelvin.
- R: resistance, in ohms.
- Δfeff: effective noise bandwidth, in hertz.
The calculator converts Celsius and Fahrenheit to kelvin with these formulas:
Three more results come from the same inputs:
The noise density en is the noise per square root of one hertz. It does not depend on bandwidth. The noise current In is the noise voltage divided by the resistance. The available noise power Pn is the most noise power the resistor could deliver to a matched load.
Worked Example Using the Default Values
The calculator starts with 10 kΩ, 25 °C, 20 kHz, and the brick-wall shape.
- Resistance: 10 kΩ = 10,000 Ω.
- Temperature: 25 + 273.15 = 298.15 K.
- Effective bandwidth: 20,000 Hz × 1 = 20,000 Hz.
- Multiply: 4 × 1.380649 × 10−23 × 298.15 × 10,000 × 20,000 ≈ 3.293 × 10−12 V².
- Square root: √(3.293 × 10−12) ≈ 1.815 × 10−6 V, shown as 1.815 µV.
With the same inputs, the calculator also shows a noise density of 12.83 nV/√Hz, an RMS noise current of 181.47 pA, and an available noise power of 8.23e-17 W. If you switch to the RC low-pass option, the 20 kHz cutoff becomes a 31.42 kHz effective bandwidth, and the noise voltage rises to about 2.274 µV.
How to Use the Resistor Thermal Noise Calculator
- Enter the Resistance (R). It must be greater than zero.
- Choose the Resistance Unit: ohms, kilohms, or megohms.
- Enter the Temperature (T) of the resistor.
- Choose the Temperature Scale: Celsius, Kelvin, or Fahrenheit.
- Enter the Noise Bandwidth (Δf). It must be greater than zero.
- Choose the Bandwidth Unit: Hz, kHz, MHz, or GHz.
- Pick a Bandwidth Shape Assumption: brick-wall (direct ENBW) or first-order RC low-pass.
- Click Calculate Noise. Click Reset to restore the default values and hide the results.
The large number at the top is the RMS noise voltage. It scales its unit automatically, from pV up to V. Below it you will see the noise density, noise current, noise power, the temperature in kelvin, and the effective bandwidth. A plain-English summary then puts it all in one sentence.
If a field is blank, or if resistance or bandwidth is zero or negative, the result shows “Error” with a message. A temperature at or below absolute zero also shows an error.
How to Read Your Thermal Noise Results
| Result | What It Means | Display Units |
|---|---|---|
| RMS Thermal Noise Voltage (Vn) | Total noise voltage across the effective bandwidth | pV, nV, µV, mV, or V |
| Voltage Noise Density (en) | Noise per square root of one hertz | pV/√Hz, nV/√Hz, or µV/√Hz |
| RMS Noise Current (In) | Noise voltage divided by resistance | pA, nA, µA, or mA |
| Available Noise Power (Pn) | Most noise power the resistor could deliver to a matched load | nW, pW, fW, or scientific notation in W |
| Absolute Temp / Eff. Bandwidth | The kelvin temperature and effective bandwidth actually used | K and kHz |
Very small power values below 1 fW appear in scientific notation. For example, 8.23e-17 W means 8.23 × 10−17 watts. The summary line always shows bandwidth in kHz, so 20 Hz appears as 0.02 kHz.
What Changes the Noise Level
Noise voltage grows with the square root of resistance, temperature, and bandwidth. So it grows more slowly than the inputs do. Four times the resistance gives twice the noise voltage. The same is true for four times the bandwidth or four times the absolute temperature.
Noise current works the other way. It falls as resistance rises, because it is the noise voltage divided by R.
Engineering Advisories
The calculator adds an advisory note in two cases. One appears when the resistance is 1 MΩ or more. The other appears when the temperature is above 100 °C (373.15 K). These notes are reminders only. They do not change the calculated values.
Common Mistakes to Avoid
- Reading “MΩ” as milliohms. The third resistance option is megohms (1,000,000 Ω). There is no milliohm option.
- Applying the RC factor twice. If your bandwidth is already an ENBW figure, use the brick-wall option. Use the RC option only when you enter a −3 dB cutoff frequency.
- Expecting total circuit noise. The calculator covers thermal noise from one ideal resistor. It does not include flicker (1/f) noise, amplifier noise, or the effect of stray capacitance.
Frequently Asked Questions
What is thermal noise in a resistor?
Thermal noise is a small random voltage caused by heat moving the electrons inside a resistor. It exists in every resistor above absolute zero, even with no current flowing. It is spread evenly across frequencies, so it is called white noise. Hotter resistors, higher resistance, and wider bandwidth all raise it.
Why is the noise power the same for any resistance?
Available noise power equals kB × T × Δf, and resistance does not appear in that formula. A larger resistor makes more noise voltage, but it also delivers less current. The two effects cancel out. That is why the calculator shows the same noise power for 100 Ω and 1 MΩ at the same temperature and bandwidth.
What does nV/√Hz mean?
Nanovolts per root hertz is a unit of noise density. It tells you how much noise falls into each slice of bandwidth. To get total RMS noise, multiply the density by the square root of the bandwidth in hertz. For example, 12.83 nV/√Hz × √20,000 Hz is about 1.815 µV.
Why does the RC option multiply bandwidth by π/2?
A first-order RC low-pass filter does not cut off sharply. Some noise above the −3 dB point still gets through. The equivalent noise bandwidth of this filter is π/2 times its cutoff frequency, or about 1.571 times. The calculator applies that factor when you choose the RC option.
Can I enter a negative temperature?
Yes, in Celsius or Fahrenheit, as long as it stays above absolute zero. That lets you check cooled or cryogenic circuits. In Kelvin, the value must be greater than zero. If the temperature works out to 0 K or less, the calculator shows an error instead of a result.
How do I find the noise of several resistors?
This calculator handles one resistance at a time. For resistors in series, you can enter the total resistance. For separate noise sources, engineers usually combine them as the square root of the sum of their squared RMS values. You can run each resistor through the calculator and then combine the results that way.