Photon Detection Efficiency Calculator

Pri Geens

Pri Geens

Photon Detection Efficiency (PDE) Calculator

Detection Efficiency Evaluation

Photon Detection Efficiency (PDE) 0.0%
Photon Detection Efficiency (PDE) combines optical absorption, geometric architecture, and carrier multiplication probability into a single performance metric: PDE = QE × FF × P_tr. It directly determines a sensor’s sensitivity in low-light imaging, LiDAR, and high-energy physics. Mobile-optimized layout for laboratory or field calculations.

What Is a Photon Detection Efficiency Calculator?

A photon detection efficiency calculator determines the percentage of incoming photons that a photodetector successfully detects. It calculates this percentage by multiplying quantum efficiency, fill factor, and avalanche trigger probability or by dividing the number of detected photons by the total number of incident photons.

Photon detection efficiency measures the probability that an incoming photon produces a successful detection event. For example, a PDE of 30% means that approximately 30 out of every 100 incident photons are expected to be detected under the specified conditions.

The calculator supports two calculation methods. The component factorization method is particularly useful for understanding avalanche-based detectors such as silicon photomultipliers (SiPMs). The direct photon count method is useful when incident and detected photon counts are available.

Both methods return PDE as a percentage between 0% and 100%. The calculator also displays the input values used, an efficiency classification, and a predefined technology benchmark.

Photon Detection Efficiency Formula and Calculation Method

Photon detection efficiency can be calculated using two mathematical methods. The appropriate formula depends on the information available about your detector or experiment.

1. Component Factorization Method

The component factorization method combines three factors that influence the probability of successful photon detection.

PDE(%)=QE100×FF100×Ptr100×100\text{PDE}(\%)=\frac{QE}{100}\times\frac{FF}{100}\times\frac{P_{tr}}{100}\times100

Where:

  • PDE: Photon detection efficiency, expressed as a percentage.
  • QE: Quantum efficiency, or the percentage of photons converted into charge carriers in the photosensitive material.
  • FF: Fill factor, or the percentage of the detector’s total area that is photosensitive.
  • Ptr: Avalanche trigger probability, or the percentage probability that a photogenerated carrier initiates a self-sustaining avalanche.

Because all three inputs are entered as percentages, the calculator first divides each value by 100. It then multiplies the resulting decimal values and converts the product back into a percentage.

Worked Example: Calculating PDE From Component Factors

Suppose a detector has the following component values, which are also the calculator’s default settings:

  • Quantum efficiency: 80%
  • Fill factor: 75%
  • Avalanche trigger probability: 45%

Substitute these values into the formula:

PDE=0.80×0.75×0.45×100\text{PDE}=0.80\times0.75\times0.45\times100
PDE=27.00%\text{PDE}=27.00\%

The calculated photon detection efficiency is 27.00%. The calculator classifies this result as Standard Commercial Performance.

2. Direct Photon Count Ratio Method

The direct method calculates detection efficiency from the number of successfully detected photons relative to the total number of incoming photons.

PDE(%)=NdetNinc×100\text{PDE}(\%)=\frac{N_{det}}{N_{inc}}\times100

Where:

  • Ndet: Number of successfully detected photons.
  • Ninc: Total number of incident photons.

Worked Example: Calculating PDE From Photon Counts

Suppose 100,000 photons reach a detector, and 35,000 are successfully detected. Using the calculator’s default photon count values:

PDE=35000100000×100\text{PDE}=\frac{35000}{100000}\times100
PDE=35.00%\text{PDE}=35.00\%

The photon detection efficiency is 35.00%. This means that 35% of the incident photons were successfully detected.

How to Use the Photon Detection Efficiency Calculator

Follow these steps to calculate the detection efficiency of your photodetector:

  1. Select the calculation method. Choose Component Factorization or Direct Photon Count Ratio based on the information you have.
  2. Enter quantum efficiency. If using component factorization, enter a QE percentage between 0 and 100.
  3. Enter the fill factor. Provide the photosensitive area percentage between 0 and 100.
  4. Enter avalanche trigger probability. Provide a probability between 0 and 100 to complete the component inputs.
  5. Enter photon counts if using the direct method. Enter the detected and incident photon counts instead of the three component percentages.
  6. Select the target detector technology. Choose SiPM, APD, PMT, or Back-Illuminated CMOS / CCD.
  7. Click Calculate PDE. View the calculated efficiency, input summary, performance classification, and technology benchmark.
  8. Click Reset if needed. Restore the original input values, component factorization method, and default SiPM selection. Reset also hides the results.

For a valid calculation, the main result displays photon detection efficiency rounded to two decimal places. Decimal inputs are accepted in both calculation methods.

Understanding Your Photon Detection Efficiency Result

The calculated PDE describes how effectively a detector converts incoming photons into successful detection events. A higher percentage indicates a greater proportion of photons being detected, but it does not describe every aspect of sensor performance.

Photon Detection Efficiency Classification

The calculator assigns an efficiency classification based on the calculated PDE. Each classification has a corresponding result color.

PDE RangeCalculator AssessmentResult Color
50% to 100%High Efficiency / Premium Sensor ClassPurple
25% to less than 50%Standard Commercial PerformanceGreen
10% to less than 25%Moderate Efficiency / Low-Light LimitedBlue
0% to less than 10%Low Efficiency / Specialized UV/IR RangeOrange

These classifications are predefined within the calculator. They are based on the unrounded PDE value and remain the same across all detector technologies. They should not be treated as universal industry standards or proof that a detector belongs to a particular performance or wavelength category.

Photon Detection Efficiency Benchmarks by Detector Technology

The calculator includes four predefined detector technology benchmarks. Selecting a detector changes the reference information displayed alongside your result.

Detector TechnologyCalculator Reference Peak PDE
Silicon Photomultiplier (SiPM)30%
Avalanche Photodiode (APD)65%
Photomultiplier Tube (PMT)25%
Back-Illuminated CMOS / CCD Image Sensor80%

These percentages are fixed reference values built into the calculator, not guaranteed performance specifications. Changing the detector technology does not change the PDE formula, input values, or calculated efficiency.

Actual detector performance depends on factors such as wavelength, operating conditions, sensor design, and optical coatings. Avalanche-based detectors may also be affected by overvoltage. The calculator does not independently adjust for these factors.

Common Input Mistakes to Avoid

  • Entering decimal fractions instead of percentages: Enter 80 for 80% quantum efficiency, not 0.80.
  • Using percentages outside the valid range: Quantum efficiency, fill factor, and avalanche trigger probability must each be between 0% and 100%.
  • Entering zero incident photons: The incident photon count must be greater than zero.
  • Entering negative photon counts: Negative values are not accepted.
  • Entering more detected photons than incident photons: The detected photon count cannot exceed the incident photon count.

Invalid or missing values in the selected calculation method cause the calculator to display 0.0% with an error message. This is different from a valid zero-efficiency result, which displays as 0.00%.

Frequently Asked Questions

What is the difference between photon detection efficiency and quantum efficiency?

Quantum efficiency describes how efficiently photons generate charge carriers in a photosensitive material. Photon detection efficiency describes the overall probability of successful photon detection. In the calculator’s component factorization model, PDE includes quantum efficiency, fill factor, and avalanche trigger probability.

Can photon detection efficiency exceed 100%?

No. Within the calculation methods used by this calculator, PDE cannot exceed 100%. Each component percentage is limited to 100%, and detected photons cannot exceed incident photons. Inputs that violate these conditions produce an error message.

What is a good photon detection efficiency?

A suitable photon detection efficiency depends on the detector technology, application, wavelength, and operating conditions. The calculator labels results of 50% or higher as High Efficiency / Premium Sensor Class. However, a lower PDE may still be suitable for a specific application or detector design.

How does fill factor affect photon detection efficiency?

Fill factor directly affects PDE in the component factorization method. A larger fill factor means a greater portion of the detector area is photosensitive. If quantum efficiency and avalanche trigger probability remain unchanged, increasing the fill factor increases the calculated PDE proportionally.

Can I calculate PDE without knowing the number of incident photons?

Yes. You can use the component factorization method if you know the quantum efficiency, fill factor, and avalanche trigger probability. These three percentages are sufficient to calculate PDE using the component model. Incident and detected photon counts are only required for the direct calculation method.

Does changing the detector technology affect the calculated PDE?

No. Selecting a different detector technology only changes the benchmark information displayed with the result. The calculated PDE depends entirely on the values entered for the selected calculation method. The efficiency assessment is also independent of the detector technology selection.

Does the calculator account for dark counts and optical crosstalk?

No. The calculator does not separately correct for dark counts, optical crosstalk, afterpulsing, or other unwanted detection events. When using the direct photon count method, the detected photon count should represent successful photon detections rather than uncorrected sensor pulses that may include noise or additional avalanches.